Type of lamps, color and light

[zihadhosenjm40]

With zoned lighting, the amount of light required is calculated separately for each zone.

If you decide to do zoned lighting, that is, the work surface will be illuminated separately, there will be its own light source above the table, it makes sense to calculate everything separately. To do this, the kitchen plan must be divided into zones, calculate the area and, based on these figures, select the number of lamps and lamps for them. Just keep in mind that two 50 W lamps in total will not give as much light as one 100 W, but about 1/3 less.

Another important point. When thailand mobile database lighting, it is best to choose the same type of lamps: halogen, LED, daylight. In extreme cases, you can combine two types, but it is better not to use all three. They give different lighting and it is almost impossible to get a reasonable result. We are not talking about incandescent lamps, since they are used very rarely: they require too much electricity, giving off a small amount of light.


When choosing lamps, it is necessary to take into account their color temperature.

In addition to the type of lamps, you need to choose lamps that give light of the same color, which is also called the color temperature of the lamps. They can give light with a blue, yellow, white tint. In principle, it's up to you to choose, but the best option = natural or neutral. It's better for the eyes and for color perception.

General lighting in the kitchen
Now let's figure out how to make general lighting in the kitchen. The traditional option is a chandelier. But it does not fit into every modern interior, nevertheless, it has a place to be.


Traditional general lighting - a chandelier in the middle of the ceiling

Often kitchens are not square, but rectangular. In this case, you can find a chandelier that is elongated. For a long and narrow room, this is the best option, which will provide optimal light distribution.

Install a long lamp in a narrow kitchen