The short cord coils up quickly.

[zihadhosenjm40]

You can set the temperature in the range from 0 to 300 degrees and it will always report the current value.
Stable stand with U-shaped tube.
The kit comes with two bolts for fixing the attachments, so you can install two pairs at the same time.
A relatively lightweight model, convenient for transportation and work with outstretched arms.
When overheated, it emits a sound signal.
Remembers the last set temperature and heats denmark mobile database to it the next time it is turned on.
Good coating of the nozzles - plastic does not stick.
The set includes six pairs of couplings with diameters from 20 to 63 mm and a suitcase.

— Cons of Inforce 03-24-01

If you need to hold the soldering iron by the handle for welding on site, it is inconvenient due to its short length - it is more suitable for stationary work on a table.
To put the device in the case, you have to remove all the attachments - it doesn’t fit on the sword with them left on.
Changing the attachments is done with a hex key, which slows down the process.
The vertical bracket from the stand is attached to the horizontal tube with only three clamps, so it can fly off over time.
Conclusion. A good device for soldering plastic pipes from various manufacturers. Electronics maintains the set number of degrees with an accuracy of +-5, which will help not to burn the ends and make even joints without overlaps. Such a soldering iron is best for leisurely welding where the aesthetic appearance of finished communications is very important.

Gigant GPW-1000
A simple soldering iron from a Russian manufacturer with a power of 1000 W. It has a mechanical temperature controller, two diodes for indicating operation, a rectangular stand on the table. The heating element has two holes for installing nozzles at different distances from the edge.