Useful books on lean manufacturing
Posted: Sat Feb 01, 2025 6:34 am
The cloakroom operation was resolved as follows: an additional section was opened, cabinets with shoe compartments were installed, signs with class numbers were installed, and the operating mode was changed so that the changing rooms were open 5 minutes before the last bell. The problems in the canteen operation were resolved by combining the serving line with the buffet, and by setting up separate entrances and exits to the room. Additional seats and a system appeared that signals when trays are running low.
The library has become more modern, which is reflected in the creation of media and video zones, and the ability to order books remotely using smartphones or tablets. Search and accounting for them can be done using a barcode scanner.
All these actions led to an increase in library attendance by 50%. Olga Vasilyeva, head of the Ministry of Education, stated that the Comfortable School project can be implemented in every educational institution.
Useful books on lean manufacturing
You can gain more knowledge in the field of lean manufacturing using the following literature:
Michael George. "Lean Six Sigma in Services"
In this book, the author kuwait email list examines these principles in detail, providing a large number of real-life examples. The principles of implementing these techniques into an organization's work are also outlined here. Specific examples are considered on a company operating in the service sector. The author did not forget about the main difficulties that may be encountered on the path to implementing lean manufacturing.
James P. Womack and Daniel Jones. Lean Manufacturing: How to Eliminate Waste and Make Your Company Prosper and Selling Products and Services the Lean Way
The first of these two books was published relatively recently, the information in it is most relevant today, so it immediately became a bestseller. The second was published a little earlier, so its practicality is of slightly less importance. Despite this, both works are quite useful, since the authors encountered the basics and problems of the lean management system in practice.
Books on lean manufacturing implementation
Source: shutterstock.com
Shigeo Shingo. "Study of Toyota Production System from the Viewpoint of Production Organization"
Shiego Shingo is the man who developed and perfected such methods as Poka Yoke, SMED and "Foolproofing". The experience he gained while managing the Toyota automobile company allowed him to decorate the book with examples on this topic. At the same time, the author dwelled in detail on the features of implementing lean manufacturing in any other industry, which makes this book useful for anyone who wants to master the principles of lean management.
Jeffrey Liker. "The Toyota Way: 14 Management Principles of the World's Leading Company"
The book examines in detail the 14 principles that underlie the production process of the Japanese auto giant. The author of the book himself is the person who identified the eighth type of waste, which is the unrealized creative potential of the company's employees. To do this, he spent more than 20 years studying the company's philosophy, observing the development of employees, and then compiled the most successful cases.
Raju Navi, Prabhu Jaideep. "Lean Innovations. Smart Cost Technologies"
In this book, the authors examine in detail the basic principles of the lean manufacturing system, without forgetting to demonstrate illustrative cases for each of them.
The library has become more modern, which is reflected in the creation of media and video zones, and the ability to order books remotely using smartphones or tablets. Search and accounting for them can be done using a barcode scanner.
All these actions led to an increase in library attendance by 50%. Olga Vasilyeva, head of the Ministry of Education, stated that the Comfortable School project can be implemented in every educational institution.
Useful books on lean manufacturing
You can gain more knowledge in the field of lean manufacturing using the following literature:
Michael George. "Lean Six Sigma in Services"
In this book, the author kuwait email list examines these principles in detail, providing a large number of real-life examples. The principles of implementing these techniques into an organization's work are also outlined here. Specific examples are considered on a company operating in the service sector. The author did not forget about the main difficulties that may be encountered on the path to implementing lean manufacturing.
James P. Womack and Daniel Jones. Lean Manufacturing: How to Eliminate Waste and Make Your Company Prosper and Selling Products and Services the Lean Way
The first of these two books was published relatively recently, the information in it is most relevant today, so it immediately became a bestseller. The second was published a little earlier, so its practicality is of slightly less importance. Despite this, both works are quite useful, since the authors encountered the basics and problems of the lean management system in practice.
Books on lean manufacturing implementation
Source: shutterstock.com
Shigeo Shingo. "Study of Toyota Production System from the Viewpoint of Production Organization"
Shiego Shingo is the man who developed and perfected such methods as Poka Yoke, SMED and "Foolproofing". The experience he gained while managing the Toyota automobile company allowed him to decorate the book with examples on this topic. At the same time, the author dwelled in detail on the features of implementing lean manufacturing in any other industry, which makes this book useful for anyone who wants to master the principles of lean management.
Jeffrey Liker. "The Toyota Way: 14 Management Principles of the World's Leading Company"
The book examines in detail the 14 principles that underlie the production process of the Japanese auto giant. The author of the book himself is the person who identified the eighth type of waste, which is the unrealized creative potential of the company's employees. To do this, he spent more than 20 years studying the company's philosophy, observing the development of employees, and then compiled the most successful cases.
Raju Navi, Prabhu Jaideep. "Lean Innovations. Smart Cost Technologies"
In this book, the authors examine in detail the basic principles of the lean manufacturing system, without forgetting to demonstrate illustrative cases for each of them.