If the plumb line and level show that

[zihadhosenjm40]

What about wallpaper? To remove it quickly, you need a soap-based solution or wallpaper remover. It is sold in hardware stores. Paper wallpaper is enough to wet with a roller, paintbrush or spray. If we are talking about waterproof vinyl wallpaper, then it is perforated with a needle roller or a knife. Through the holes, the liquid will penetrate costa rica mobile database the wallpaper and affect it and the wall.
Fasteners, screws, dowels, etc. are also removed from the walls.
The wall is tapped with a hammer. This way you can determine if there are weak spots in the wall in order to remove the old plaster.
The wall is cleaned of debris, dust, and grease stains.
The walls are clean, but that's not all. Further work depends on the circumstances. If the walls are smooth and plastered, then you can start priming. If these are bare and uneven walls, then you need leveling plaster.

Alignment of walls
For a new building, there is no need to remove the old coating, since it simply does not exist yet. However, the walls are also cleaned of dust and dirt. All that remains is to apply the base and finishing layer of plaster. After all, any wall, concrete, wood, or brick, has flaws. Plaster will help get rid of them.

the deviations are small, then a leveling layer of plaster is enough. Mixtures for decorative work are not suitable, since they are calculated for a layer of no more than 1.5 mm. And from the financial side, this is unprofitable. Therefore, plaster is an ideal option. You can see how to apply the leveling mixture yourself here:



There is another option, called dry. For this, you will need to cover the surface with plasterboard sheets. You just need to decide which method to use: