Technology of laying porcelain tiles on the floor

[zihadhosenjm40]

The same factors influence the initial setting time of the adhesive composition, the state when the solution has hardened enough to allow walking on the tiled floor. The final setting of polymer-cement mixtures, when the surface is subject to operational load, takes at least 24 hours, and with a thick layer (more than 2 cm) and low temperature (below 5 degrees), the period of complete hardening extends to 48 hours.



The sequence of actions when facing the base of the floor ghana mobile database on several factors, such as:

area of ​​the surface to be finished;
temperature conditions (operating and at the time of installation);
expected loads during operation of the tiled floor surface.
When tiling large areas (industrial, commercial, warehouse premises), a process chart is drawn up for the installation of porcelain stoneware floors. The document specifies the details of the work process - the tile layout scheme, the width and location of expansion joints, the laying method (with heavy loads on the surface, it is necessary to ensure that the porcelain stoneware is glued over the entire area of ​​each element of the tiling) and other nuances related to a specific room.

Facing small floors in ordinary living spaces does not require complex design calculations, since the area and surface load are small. Before starting the facing, the master only needs to prepare the necessary tool and properly prepare the floor for porcelain stoneware.

Necessary tools and materials