It is not rational to repair the Krot walk-behind tractor yourself

[zihadhosenjm40]

If you suspect a jam, you should disassemble the motor and make sure that the components and parts are intact. Damaged or deformed elements must be replaced. Otherwise, the motor will quickly break down and become unserviceable.

DIY Cultivator Repair
Self-repair of the Krot walk-behind tractor, which is under warranty, is not rational. In such circumstances, it is better to contact the service center. If the warranty period has passed, you can try to fix the problems yourself.

The Krot walk-behind tractor is a simple device, so any simple breakdown in it can be fixed by anyone familiar with the operating instructions and the block diagram.

The most common breakdowns are:

air filter contamination;
no spark;
incorrect gap between electrodes (norm 0.8 mm);
ignition problems.

Usually, owners of these walk-behind tractors encounter problems with the engine. It may not start at all or work intermittently.

Signs of malfunction are:

audible interruptions in operation;
during startup and operation, the power does not nigeria mobile database to the required level;
the engine stops spontaneously.
The algorithm for checking for problems is as follows:

Determine if there is fuel in the gas tank.
Inspect the fuel filter (if there is a suspicion that there is no fuel flow to the carburetor). Clean the filter if necessary.
Start the cold engine.
Make sure that the carburetor air damper remains in the closed position.
Seek professional help if you are unable to identify and fix the problem yourself.

Owners of these walk-behind tractors usually encounter problems with engine operation.

How to set the ignition
To set the ignition, use a special probe and set the gap between the electrodes within 0.6-0.8 mm. After that, check whether the spark of the contactless magneto MB-1 is formed.

It is recommended to use spark plugs A-11 or A17B.