Folk methods of removing mold

[zihadhosenjm40]

If we are talking about a loose plastered wall, the situation is a little more complicated: spores can remain in the pores.

The worst thing is when the blackness affects the walls covered with wallpaper. There is nothing to do here - all that remains is to tear off the wallpaper, putty, prime the walls and re-paper everything again.

Mold on the walls is also harmful because it can easily spread to furniture. It is especially bad when it affects wooden parts, significantly spoiling their appearance. It is now clear why fungus is dangerous; its appearance is often the result of insufficient sunlight and dampness, so it is recommended to ventilate poorly lit bedrooms more often and, if possible, heat them.

There are different ways to bolivia mobile databasethe problem, much depends on how much it has affected the room. Folk methods are an effective option if you turn to them in a timely manner.

A good result is achieved by treatment with chlorine bleach, which destroys any form of microorganisms. But the effect will be noticeable only on smooth materials, wooden and loose surfaces will still remain contaminated due to their high degree of porosity;
Ammonia mixed with warm water in a 1:1 ratio gives a good result on smooth surfaces. It is strictly forbidden to mix it with bleach due to the high toxicity of the resulting mixture;
You can get rid of fungus using safe baking soda. It is mixed with water to form a paste, which should be applied to the infected areas for several minutes, then rubbed with a brush and washed off. Soda is suitable for almost all materials without changing their original appearance;
Hydrogen peroxide also gives a good result, but it should be used with caution on colored surfaces. It also penetrates the structure of the material and pores, killing all types of microbes. With this treatment system, ventilation and thorough rinsing of the solution are not required.
In addition to the folk remedies described, you can also use purchased compositions. But keep in mind that in most cases they have a certain toxicity, so the work must be carried out, observing all safety precautions.