Now let's take a closer look at how to make shelves on the balcony yourself and what you'll need for this.

[zihadhosenjm40]

Making shelves is not difficult, but it is better to do this while renovating the balcony. This makes it easier to select and buy materials, and if necessary, you can always quickly review the loggia cladding options to make the shelving wider or deeper.

Tools and materials
Most often, systems are made from laminated chipboard and plywood, so the following set will be useful to the master:

chipboard sheets according to the number of shelves;
wooden blocks of different widths for the rack frame and guides;
metal corner for fastening at the rate of 6-8 pieces per shelf;
self-tapping screws shorter than the thickness of the timber, so that they are well secured;
hammer drill, screwdriver.
Note! The work will be done malaysia mobile database wooden products, so gloves will come in handy. Also, do not forget about the finishing coating of the structure, fire impregnations and antiseptic compounds. Treat the timber with mixtures before starting work and let it dry.

Manufacturing and assembly
Let's look at several options for making shelves on the balcony with your own hands.

Let's start with the side structures, the algorithm of work is as follows:

Mark the height of the fastening and the length of the product on the wall. It is important to maintain the accuracy of the horizontals, and you can measure them with a water level or plumb line.
Cut the chipboard sheet to the dimensions of the shelf. Screw a metal corner to the bottom. You will need 2-3 corners, depending on the length of the shelf.
You can fix the shelves to the wall by first punching holes with a hammer drill, or you can place two beams (vertically) at an equal distance from the corner, on which you can fix the horizontal surfaces.