The ends are covered with thermal insulation material;

[zihadhosenjm40]

To install wiring from a bathhouse, it is necessary to ensure not only the required level of safety, but also to carefully protect the steam room from heat loss.

Here the cutting is carried out in three stages:

Preparing the site.
Installation of a protective box.
Careful insulation of all joints.
Step-by-step installation of a place for the chimney pipe outlet

To select and properly organize a place, follow these steps:
to select it, you need to use a plumb line;
To maintain an attractive design, it is recommended to use a decorative insert made of a metal sheet. This sheet can be secured with screws or nails.
How to make a ceiling cut for a chimney

It is much easier to complete all planned work if you break it down into small stages:

cutting an opening of the required size and, if necessary, creating a frame from timber;
installation of sandwich pipes at the wiring location;
installation of the box;
fastening of a metal plate;
thermal insulation;
fixation.
The procedure for installing the passage unit uganda mobile database the ceiling

The process of attaching the protective box itself is usually not difficult. To do this, follow a simple sequence of actions:

in the chimney passage box, all parts that come into contact with the ceiling elements, as well as its bottom, are insulated;
the pipe is carefully inserted, but it should not fit tightly against the walls;
we secure the assembly using self-tapping screws or other fasteners;
insulation is carried out in the attic, and the voids are filled with bulk material;
If desired, you can decorate the structure.
Selection of material for thermal insulation

There are several types of thermal insulation materials for any occasion. Let's look at the most popular ones.

Technical basalt wool is used most often. It is obtained by melting certain rocks. In addition to low thermal conductivity, it also retains moisture and can withstand high temperatures from 700° to 900°.
Kaolin wool is produced by melting silicon oxide materials at a temperature of 1750°. It has a low thermal conductivity coefficient, does not melt or crumble at high temperatures. The maximum operating temperature is 1100-1250°. It has a long service life and can withstand many starts and coolings without losing its qualities.